Ecosoft CROSS 90 - Page 12

12
INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2023
8. Connect the power adapter to the power output on the connecon panel of the rack.
To install the lters, present each lter in its respecve housing with the handle in a horizontal
posion (1):
1. The CF lter cartridge is installed on the
rst stage CF of main body tank;
2. The RO lter cartridge is installed on the
second stage RO of main body tank;
3. The CB lter cartridge is installed on the
third stage CB of main body tank.
Insert rmly all the way and turn the handle
90 degrees clockwise. Aer installaon, the
lters should be as shown in posion (2).
(1) (2)
Power interface
Power
3. FILTER INSTALLATION