3. Start the application and make sure the location permission function is
granted (on) when you are running the app for the first time. In case
you disabled the location access function for this application, please go
to your mobile device settings page and configure it as “on”. The
application needs your location to configure weather services.
4. Press “Configure New Device”. This may be automatic on the very
first use of the application.
5. Tap on the appropriate device type and select “Next”. Follow the
prompts.
Figure 23
6. Confirm Wi-Fi configuration mode is active, as prompted. Correct if
necessary (see above). Press “Next”.
7. For Android version:
Enter your preferred Wi-Fi SSID (network name) and security
password. You can set the uploading to weather servers (Ecowitt
Weather / Weather Underground / Weather Cloud / WOW /
Customized Website) on this page or do that after the Wi-Fi
configuration done.
To Next Page
Loading...
