ECOWITT WS2910 - Page 71

71
Indoor sensor
Specification
Temperature range
-10°C – 60°C (14°F - 140°F)
Temperature resolution
0.1°C, or 0.1°F
Humidity range
10% ~ 99%
Humidity resolution
1%
Barometric pressure range
700-1100hPa (20.67-32.5inHg)
Barometric pressure accuracy
± 3 hPa in 700 – 1,100 hPa range
Barometric pressure resolution
0.1 hPa (0.01 inHg)
Alarm duration
120 sec
Sensor reporting interval
60s
Table 12: Indoor sensor specification
Power
Specification
Base station/console
5V DC adaptor (included), Power Consumption:
0.5 Watts (1.25 Watts during Wi-Fi
configuration mode)
Base station/console
3 x AAA batteries (not included)
Outdoor sensor
Solar panel (built-in)
Outdoor sensor
(backup)
2 x AA 1.5V LR6 Alkaline (not included), or
2 x AA 1.5V Lithium battery (not included)
Table 13: Power specification
The primary power source for the outdoor sensor is the solar panel. When
available solar power (light over recent period) is insufficient, the batteries
will be used. In outdoor climates that frequently have sustained temperatures
below 0°C (or 32°F) the use of Lithium batteries is strongly suggested as
these are performing better than Alkaline batteries under such
circumstances.