EDAN elite V5 - 12-Lead Analysis Review

Patient Monitor User Manual Review
- 197 -
■ Select Record and output the arrhythmia waveform by the recorder.
■
According to the actual clinical needs, select another name from the pull-down list of
Rename for the arrhythmia event. Confirm the changes to make the settings take effect.
■
Select Delete to remove a specific arrhythmia event.
■
Select Alarm List or Exit to get back to the arrhythmia review interface.
NOTE:
1 If there are more than 200 arrhythmia events, the monitor will only keep the recent
ones.
2 The name of arrhythmia event will be shown on the alarm status area.
3 The renaming is only available for the ARR alarm event of the current patient, not for
that of the history patient.
24.6 12-Lead Analysis Review
To review the 12-lead analysis result, please press the Analysis Review key on the
screen or select
Menu > Review > Analysis Review.
In the 12-lead analysis review window:
■
The user can switch between results and waveforms. Select Waveform to review the
analysis waveforms and
Result to review the analysis results.
■
Select Delete to delete the analysis results displayed on the current screen.
■
Select and to browse more analysis results or waveforms.
■
Select Record to print out the analysis results by the recorder.
■
Select Print to print out the analysis report by the printer.