EDAN iM3 Service Manual (English)

Other manuals for EDAN iM3

Questions and Answers:

M
markgibsonSep 3, 2025
Why isn't the built-in scanner on my EDAN Medical Equipment emitting light or scanning?
- L
  Luis SteeleSep 3, 2025
  If the built-in scanner on your EDAN Medical Equipment isn't emitting light or is unable to scan, it could be due to a bad connection of the wire between the scanner and parameter board, scanner malfunction leading to communication failure with the main control board, or main control board malfunction leading to communication failure with the scanner. Check the connection and reconnect the connecting wire. If the issue persists, replace the scanner or the main control board.
L
Laura TuckerSep 2, 2025
What causes disabled operation or measurement functions on EDAN Medical Equipment?
- J
  Jonathan JohnsonSep 2, 2025
  If an operation or measurement function is disabled on your EDAN Medical Equipment, it could be due to main control board or corresponding component damage. Examine the main control board and the corresponding components.
R
Robert TravisSep 1, 2025
Why is there no sound or a hoarse sound coming from the EDAN Medical Equipment speaker?
- W
  William RamosSep 1, 2025
  If the speaker on your EDAN Medical Equipment has a hoarse sound or no sound at all, it could indicate a malfunction in the audio subassembly of the main control board or a malfunction in the speaker or connecting wire. Consider replacing the main control board, or replacing the speaker or connecting wire.
J
Jason ReedAug 31, 2025
What to do if the rotary knob on my EDAN Medical Equipment isn't working?
- H
  hannahdavisSep 1, 2025
  If turning the rotary knob on your EDAN Medical Equipment produces no reaction, it could be due to a bad connection of the wire between the rotary knob and main control board, rotary knob switch damage, or main control board failure. Check the connection and reconnect the connecting wire. If that doesn't resolve the issue, replace the rotary knob or the main control board.
B
Benjamin GriffinAug 30, 2025
Why can't my EDAN Medical Equipment connect to Wi-Fi?
- C
  cynthiaholderAug 30, 2025
  If your EDAN Medical Equipment is unable to connect to Wi-Fi, it could be due to the antenna not being connected to the Wi-Fi board, a Wi-Fi board failure, or a main control board failure. Check and reconnect the connecting wire. If the issue persists, replace the Wi-Fi board or the main control board.
R
Richard SpenceAug 30, 2025
What should I do if my EDAN Medical Equipment doesn't recognize a USB flash disk?
- J
  Jacqueline AlexanderAug 30, 2025
  If your EDAN Medical Equipment shows no reaction when you insert a USB flash disk, the disk itself might be damaged, or there could be a parameter board failure or main control board failure. Try another USB flash disk. If it still doesn't work, consider replacing the parameter board or the main control board.
T
Troy JacksonAug 29, 2025
How do I fix network connection issues with my EDAN Medical Equipment?
- D
  Donna StewartAug 29, 2025
  If you're unable to connect your EDAN Medical Equipment to the network, the problem might be a malfunction in the network linking wire, a Network Bed No. conflict, or a main control board failure. Check and repair the network linking wire or the HUB. Try to change Bed No.. If problems persist, replace the main control board.
E
Elizabeth SilvaAug 28, 2025
Why are wrong characters displayed on my EDAN Medical Equipment screen?
- L
  Latoya McbrideAug 28, 2025
  If your EDAN Medical Equipment displays wrong characters, it could be due to a bad connection of the LCD display screen wire or LCD display screen failure. Check the connection wire of LCD connection and main control board. If the issue persists, replace the LCD screen.
M
mikayla67Aug 27, 2025
How to troubleshoot disabled buttons on EDAN Medical Equipment?
- J
  James MarshAug 27, 2025
  If the buttons on your EDAN Medical Equipment are disabled, the cause may be button damage or main control board damage. You may need to replace the button or the main control board.
P
Philip BrownAug 26, 2025
Why does my EDAN Medical Equipment crash unexpectedly?
- B
  Barbara DavisAug 27, 2025
  Unexpected crashes in your EDAN Medical Equipment can be caused by instantaneous intensive network interference, poor power board performance, poor main control board performance, or bad connections of the power board or main control board. Check the power supply and grounding system. You may need to replace the power board or main control board, or replace or repair connectors.

EDAN iM3 Specifications

General

SpO2	Yes
NIBP	Yes
Temperature	Yes
Respiration	Yes
Pulse Rate	Yes
Display Size	8.4 inches
Battery	Rechargeable lithium-ion
Battery Life	Up to 4 hours
Storage Temperature	-20 ~ 60 ℃

Related product manuals

EDAN iM3 User Manual

Table of Contents

Other manuals for EDAN iM3

Questions and Answers:

EDAN iM3 Specifications

Related product manuals