Why does the touch screen on my EDAN Medical Equipment not respond?
If the touch screen on your EDAN Medical Equipment is unresponsive, it could be due to a bad connection of the touch screen wire, touch screen damage, or main control board failure. Check and reconnect the connecting wire. If that doesn't work, consider replacing the touch screen or main control board.
What to do if my EDAN Medical Equipment shuts down suddenly?
If your EDAN Medical Equipment shuts down suddenly, especially if it's battery-powered, the battery may be low; connect it to AC power to charge. Other potential causes include a high voltage strike (like lightning), a bad power input connection, power failure, or main control board failure. Check the power supply, grounding system, and power input. If necessary, replace the power supply or main control board.
Why does NIBP function communication stop on my EDAN Medical Equipment?
General| SpO2 | Yes |
|---|---|
| NIBP | Yes |
| Temperature | Yes |
| Respiration | Yes |
| Pulse Rate | Yes |
| Display Size | 8.4 inches |
| Battery | Rechargeable lithium-ion |
| Battery Life | Up to 4 hours |
| Storage Temperature | -20 ~ 60 ℃ |
To Next Page
