SE-2003&SE-2012 Holter System Recorder User Manual
- 5 -
2 Introduction
The manual mainly describes how to operate and maintain SE-2003/SE-2012 Holter System
Recorder (thereafter referred as SE-2003/SE-2012). SE-2003/SE-2012 plus SE-2003/SE-2012
Holter Analysis System compose SE-2003/SE-2012 Holter System. For the operation of analysis
software, refer to software manual.
Ambulatory Electrocardiogram (Holter) detection technology is an effective tool to detect
cardiovascular without the inference of distance, time, environment, the restriction of body
position and activity. It can detect large amount of ECG information and is unique in capture of
transient myocardial ischemia and diagnosis of transient arrhythmia.
SE-2003/SE-2012 is powered by an AAA battery. SD card is used as storage media and LCD
screen is used to set parameters and check wave quality. With a normal AAA alkaline battery,
SE-2012 can continuously record non-compressed and full-disclosure 12-lead ECG data for 24～
48 hours or 3-channel ECG data for 24~96 hours . With a normal AAA alkaline battery, SE-2003
can continuously record non-compressed and full-disclosure 3-channel ECG data for 24~96 hours.
With a Li-Fe battery, SE-2003(7d) can continuously record non-compressed and full-disclosure
3-channel ECG data for 7 days. SE-2003/SE-2012 can detect and record pacemaker pulse
information.
NOTE: Long-time recording analysis should be supported by software with
corresponding functions.
To Next Page
Loading...
