EDAN SE-2003 - Physical, Battery, and Performance Data; Physical and Battery Specifications; Performance Metrics

SE-2003&SE-2012 Holter System Recorder User Manual
- 42 -
Atmospheric Pressure: 700hPa ~1060hPa 860hPa ~1060hPa
A1.3 Physical Specifications
Dimensions 68mm × 53mm × 16 mm (2.68 in × 2.08 in × 0.63in)
Weight Approx. 42 g (0.1 lbs) (excluding battery)
Enclosure Molded plastic / water resistant
Operating position Belt Clip, Lanyard
A1.4 Battery Specifications
Battery type 1 AAA alkaline battery or Ni-MH battery
Battery life Alkaline battery ≥ 48 hours
A1.5 Performance Specifications
Channels 3 or 12 channels
Recording Full disclosure, no data compression
Frequency Response
0.05-60Hz
dB
dB
4.0
0.3
+
−
Input impedance 10MΩ
Gain 1/2X, 1X and 2X
CMRR ≥ 60dB
Sample Rate 128 to 1024 samples/second
A/D Resolution 8/10/12/16 Bit Sampling
ECG Signal Verification LCD at hook-up or on demand
Data Transmission Through USB cable or SD card reader
NOTE: Sampling rate and A/D Resolution are adapted to software and set before sales.