SE-2003&SE-2012 Holter System Recorder User Manual
- 11 -
3 Operation Preparations
WARNING
Before use, the recorder, patient cable and electrodes should be checked. Replace them
if there is any evident defectiveness or aging which may impair the safety or the
performance, and make sure that the equipment is in proper working condition.
3.1 Requested Materials
1. Recorder, patient cables, leads, SD card;
2. An analysis system able to make electronic labeling registration or other specialized
software;
3. 10 (or 5, 7) disposable electrodes;
4. 1 AAA Alkaline battery or 1 fully charged Ni-MH rechargeable battery;
5. Patient log, pen;
6. Other supplementary materials like alcohol, medical adhesive plaster.
3.2 Connecting the Patient Cable to the Recorder and
Electrodes
WARNING
The performance and electric shock protection can be guaranteed only if the original
patient cable and electrodes of the manufacturer are used.
SE-2003/SE-2012 adopts optimized and incorporated lead structure, which can reduce potential
difference disturbance during monitoring process.
3.2.1 Connecting the Patient Cable to the Recorder
Connect the patient cable to the patient cable socket on the top side of the recorder.
3.2.2 Connecting the Patient Cable to Electrodes
Standard lead name and color code are marked on each electrode head of every lead.
Snap the electrodes to the lead wires according to the color identifiers.
To Next Page
Loading...
