SE-2003&SE-2012 Holter System Recorder User Manual
- 10 -
not be mixed up when reviewing data package. Numerous data are included in the
package like hospital, signal channel, sampling rate, event information, recording date
and time, so as to facilitate data management and exchange.
z Leads-off warning: Poor electrode connection will be warned by voice or icon.
z Power supply management, prompt of detection of battery under voltage; the power
supply will shut off automatically after long time idling (15 minutes after last keyboard
response) or 30 minutes after end of recording so as to save battery capacity and avoid
battery leakage.
z Flexible communication mode, support plug-and-play SD card as well as USB 2.0
high-speed direct communication. SD card helps to speed up patient turnaround and is
convenient to maintain so as to alleviate users’ burden; on the other hand, USB 2.0
high-speed communication mode is simple and easy.
z Events button precisely records event time.
NOTE: Press Confirmation key to restart SE-2003/SE-2012 if it shuts off automatically.
There is no need to load battery again.
To Next Page
Loading...
