SE-2003&SE-2012 Holter System Recorder User Manual
- 23 -
NOTE: Please confirm that your analysis system supports this function. It’s suggested to
turn on this setting to effectively prevent the unanalyzed data from being deleted
unexpectedly.
4.3.6 Languages
Language of menu and prompting message can be set to Chinese or English or other languages.
Default value is the value set last time.
4.3.7 Font
Font of menu and prompting message can be set to Large or Small. Default value is the value set
last time.
4.3.8 Check WP Switch
Detection of write-protect switch of SD card, optional value can be set to on or off. Default value
is the value set last time.
If set to off, the recorder will not detect write-protect switch of SD card. Recording will not be
affected even if write-protect is on Lock position.
If set to on and recorder detect that write-protect switch is on Lock position, the recorder will
display a warning message and refuse to record.
NOTE: It is recommended to set the parameter as on so as to avoid deleting protected
data accidentally.
4.3.9 Pole-fall Sound
The detection and warning for electrodes falling during recording can be set to on or off. Default
value is the value set last time.
Language: English
Font: Large
Check WP Switch: On
Pole-off sound: On
Battery type: Alkaline
To Next Page
Loading...
