EasyManua.ls Logo

EdgeStar DWP62BL - Rinse Aid Dispenser Guide; Rinse Aid Dispenser Operation

EdgeStar DWP62BL
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Press the grey snap latch FIRST and then turn the drain pump counter clockwise to remove.
Slide the pump out of the housing.
Step 3: Install the new drain pump
Slide the pump into the housing.
Turn the pump clockwise until the locking latch clicks and the pump is locked in place.
Reattach the electrical connectors (Note: The drain pump is an A/C powered pump wiring
connections are interchangeable).

Other manuals for EdgeStar DWP62BL

Related product manuals