19
Air Breaker Removal and Replacement Instructions
The air breaker functions to supply water for wash and rinse while preventing siphoning or back-flow of
wash water into the water supply. It also functions to supply air venting to aid in dish drying.
Tools and Parts Needed:
- Phillips Screwdriver - Flat Tip Screwdriver
- Needle nose pliers - Gear drive hose clamps (4)
Step 1: Remove Base Tray Cover
Refer to instructions to remove panel found in the “Drain Pump Removal and Replacement”
section of this document
Step 2: Remove the Outer Shell
Remove the eight (8) screws as indicated in the below image. Set screws aside.
Lift up on the outer shell and unlatch from the front of the unit. Set outer shell aside.
To Next Page
Loading...
