37
Step 5: Remove and replace the Heating Element
Use an 8mm socket to remove the nut on the heating element
Slide the heating element out of the housing
NOTE: The replacement heating element will come with a new housing. If you have not damaged the original
housing, it is easier to remove and replace just the element.
Slide the new heating element into place
Use an 8mm socket to install the securing nut
Step 6: Reconnect the electrical connections
Reinstall the electrical connectors on the back of the heating element
VERY IMPORTANT: Refer back to the pictures taken in step 4 to properly reconnect the electrical
connections in the original order.
To Next Page
Loading...
