16
III-2. Audio Speakers
You can use the wireless bridge to “bridge” any audio speakers to your Wi-Fi
network via a 3.5mm audio jack.
III-2-1. Connecting to your speakers
1. Use an audio cable (not included) to connect the Wi-Fi bridge’s 3.5mm
audio jack to the “audio in” port of your speakers.
2. Connect the CV-7438nDM’s power supply to a wall socket or an available
USB port, and press the power on/off button to switch the device on.
Ensure the LED is on (white).
III-2-2. Music Streaming
After the wireless bridge is correctly connected to your speakers, you can
stream music to your speakers wirelessly. Follow the appropriate instructions
below for iTunes & iOS or other users.
Ensure that your music player (e.g. PC, tablet or smartphone) is
connected to the same router as your CV-7438nDM.
To Next Page
Loading...
Need help?
General
