Edimax CV-7438nDM User Manual

21
III-3. Reset
If you experience problems with your wireless bridge, you can reset the device
back to its factory settings. This resets all settings back to default.
1. Press and hold the WPS/Reset button found on the back panel for at least
10 seconds.
2. Release the button when the LED displays on (red).
3. Wait for the wireless bridge to restart. The wireless bridge is ready for
setup when the LED is flashing (red).

Edimax CV-7438nDM Specifications

General

Brand	Edimax
Model	CV-7438nDM
Category	Network Router
Language	English