28
IV-3. WPS Settings
Wi-Fi Protected Setup is a simple way to establish
connections between WPS compatible devices. WPS
can be activated on compatible devices by pushing a
WPS button on the device or from within the device’s
firmware/configuration interface. When WPS is
activated in the correct manner and at the correct time
for two compatible devices, they will automatically
connect. PIN code WPS includes the use of a PIN code
between the two devices for verification.
The “WPS Settings” page displays information
regarding WPS.
It is recommended to configure data encryption/security settings
on your router/access point before using WPS.
To Next Page
Loading...
Need help?
General
