Displays the total time since the device was
turned on.
Displays the hardware version.
Displays the firmware version.
Displays the operating mode.
Displays the ESSID the wireless bridge is
connected to. The ESSID is the name used
to identify a wireless network.
Displays the current wireless channel
number.
Displays the current wireless security
setting.
Displays the device’s BSSID. The BSSID
identifies this wireless bridge in the
network, and is the same as the device’s
MAC address.
Displays the current status of the wireless
bridge.
Displays the wireless signal strength.
Displays the IP address of this device.
Displays the subnet mask of the IP address.
Displays the IP address of the default
gateway.
Displays the device’s MAC address. The
MAC address is a unique, fixed ID for this
device, it cannot be modified.