31
6. MFP Manager
6.1 MFP Server List
The “MFP Manager” can automatically find the MFP server in the
network and show it in the MFP Server List. Users can select a
MFP and click “Connect” to connect the MFP just like you have
directly connected the MFP to your computer through USB cable. It
also displays the information of the connection status.
When you don’t want to use the MFP or Printer, please click
“Disconnect” so that other users can use the device. Or you can
enable the “Auto Release” setting, so that the MFP Server will
release your connection after a period of idle time that you have
assigned.
If you unplug the USB cable or turn off the MFP while using, the
device will not display in the list. After you reconnect the USB cable
or turn on MFP, you have to click “Refresh” and “Connect” buttons
in the “MFP Manager” to recover the connection.
To Next Page
Loading...
