18
15. The default wireless setting is “Auto” mode. The MFP Server
will detect if the MFP Server is connected to a wired LAN
network through the attached Ethernet cable. If yes, it will
work in wired network. To enable the wireless setting,
please remove the Ethernet cable. For more detailed
information about wireless setting, please refer to Section
7.8.
4.3 MFP Server Utilities
After the installation is completed, there will be three utilities and a
text file in the MFP Server’s Program folder.
MFP Manager – Allows you to manage the connection between
the MFP and your computer for sharing MFP function.
Server Configuration – Allows you to configure the MFP Server’s
IP Address, network protocols and other advanced features. It also
allows you to manage the MFP Server.
Uninstall – Assistant for removing all installed MFP Server
software programs.
About Version – Display the version of each utility including in the
MFP Server software programs.
To Next Page
Loading...
