35
My Favorite List
Disconnect Disconnect the selected MFP.
Delete Delete the selected MFP Server from the “My
Favorite List”.
Auto Release
when idle time is
over xx minutes
(5-255)
To avoid you occupy the MFP overtime; you can
setup auto release function. It is used to
automatically disconnect the current connection
after the MFP is idle for a specified period of
time. By default, it is never released. It is
recommended to enable the setting after the
MFP and MFP Server are installed completely so
that the MFP resource will not be occupied
permanently.
To Next Page
Loading...
