© Edwards Limited 2012. All rights reserved. Page 47
Edwards and the Edwards logo are trademarks of Edwards Limited.
Spares, service and accessories
A705-61-880 Issue M
7 Spares, service and accessories
7.1 Introduction
Edwards products, spares and accessories are available from Edwards companies in Belgium, Brazil, China, France,
Germany, Israel, Italy, Japan, Korea, Singapore, United Kingdom, U.S.A and a world-wide network of distributors.
The majority of these centres employ Service Engineers who have undergone comprehensive Edwards
training courses.
Order spare parts and accessories from your nearest Edwards company or distributor. When you order, state for each
part required:
Model and Item Number of your equipment
Serial number
Item Number and description of part.
7.2 Service
Edwards products are supported by a world-wide network of Edwards Service Centres. Each Service Centre offers a
wide range of options including: equipment decontamination; service exchange; repair; rebuild and testing to factory
specifications. Equipment which has been serviced, repaired or rebuilt is returned with a full warranty.
Your local Service Centre can also provide Edwards engineers to support on-site maintenance, service or repair of
your equipment.
For more information about service options, contact your nearest Service Centre or other Edwards company.
7.3 Spares and maintenance kits
Refer to Table 17 (page 48) for the spares and maintenance kits for the pumps.
7.4 Accessories
A number of accessories are available for the GV pumps; these are described in the following sections.
Refer to Table 18 (page 48) for the Item Numbers of these accessories.
7.4.1 Exhaust Silencers
Fit an exhaust silencer to attenuate the pulses in the exhaust pressure, and to reduce pump-induced resonance in
your exhaust-extraction system.
7.4.2 Exhaust-Purge Kit
Fit an Exhaust-Purge Kit to allow you to connect an air or nitrogen exhaust-purge to the GV pump.
7.4.3 Booster Connection Kits
Use a Booster Connection Kit to allow you to fit an EH mechanical booster pump to the inlet of the GV pump.
To Next Page
Loading...
Need help?
General
