A705-61-880 Issue M
Page 48 © Edwards Limited 2012. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Spares, service and accessories
7.4.4 Indirect Cooling Kits
Note: We recommend that you fit an Indirect Cooling Kit if you want to use the pump with an operating
temperature in the range of 45 to 90 °C, 113 to 194 °F.
Fit an Indirect Cooling Kit to allow you to use indirect cooling on the GV pump. Two types of kit are available: fit a
Kit with TCV (Thermostatic Control Valve) when you want to control the operating temperature of the GV pump.
7.4.5 Other accessories
A number of other accessories are available for the GV pumps, as listed below; contact your supplier or Edwards for
details of these accessories:
Acoustic enclosure for the GV pump.
Acoustic enclosure for the GV pump with mechanical booster pump.
Pump motor acoustic jacket.
Gas control system.
Motor control module.
Cooling-water control panel.
Table 17 - Spares Item Numbers
Spare/Kit Item Number
Edwards Mobil SHC 629 oil (1 litre, 0.25 US gallons) H110-23-010
Edwards Mobil SHC 629 oil (4 litres, 1 US gallons) H110-23-011
Interstage (Pressure) Relief Valve (complete valve assembly) A705-11-832
Routine Maintenance Kit A705-11-825
Motor Fitment Kit A705-01-805
Inlet End (Upper) Bearing Kit A705-01-826
Air filter A506-16-000
Swing PRV Overhaul Kit A705-11-833
PRV Heavy Duty Kit A705-11-834
PRV Heavy Duty Overhaul Kit A705-11-835
Motor Coupling Insert A705-73-758
Motor Bearing Kits:
Contact Edwards for bearing kit information
Table 18 - Accessory Item Numbers
Accessory Item Number
GV250/400 Exhaust Silencer A505-71-000
GV250/400 Exhaust-Purge Kit A505-68-000
GV250/400-EH250 Booster Connection Kit A505-70-000
GV250/400-EH500 Booster Connection Kit A505-73-000
GV250/400-EH1200/2600/4200 Booster Connection Kit A505-69-000
GV250/400 Indirect Cooling Kit with TCV A505-66-000
GV250/400 Indirect Cooling Kit A505-67-000
To Next Page
Loading...
Need help?
General
