P200-02-320 Issue J
Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
Low Volt Systems High Volt Systems
(200 - 230V) (380 - 460V)
iXH100 AC010xy21000 ACA10xy21000
iXH200H AC0B0xy22000 ACAB0xy22000
iXH610 AC110xy21100 ACB10xy21100
iXH1210 AC310xy21200 ACD10xy21200
iXH1210H AC3A0xy22200 ACDA0xy22200
iXH1210HT AC3A1xy22200 ACDA1xy22200
iXH1220H AC3B0xy22200 ACDB0xy22200
iXH1220HT AC3B1xy22200 ACDB1xy22200
iXH1220HTX AC3B2xy22200 ACDB2xy22200
iXH1820 AC420xy22200 ACE20xy22200
iXH1820H AC4B0xy22200 ACEB0xy22200
iXH1820T AC421xy22200 ACE21xy22200
Where x = 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C or D depending on gas module type
Where y=1 means 'no check valve' and y=3 means 'check valve supplied'
to which this declaration relates is in conformity with the following standard(s) or other normative document(s):
EN1012-2: 1997 Compressor and Vacuum Pumps Safety Requirements; Part 2 - Vacuum Pumps.
EN61010-1: 2010 Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use; Part 1 – General Requirements.
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory use -
EMC requirements (Industrial Location Immunity – Class A Emissions)
EN50581:2012 Technical Documentation for the Assessment of Electrical and Electronic Products
with respect to the Restriction of Hazardous Substances
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition July 12, 2004, including revision July 22, 2005 -
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General
Requirements
SEMI S2-0709 - Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment
when installed in accordance with the instruction manual supplied with the pump, following the provisions of:
2006/95/EC Low Voltage Directive.
2004/108/EC Electromagnetic Compatibility Directive.
2006/42/EC Machinery Safety Directive.
2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt%
for cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS
Directive does not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
22.10.2013, Burgess Hill
Mr Mark Hope, Global Technical Support Manager Date and Place
This product has been manufactured under a quality system