© Edwards Limited 2010. All rights reserved. Page 35
Edwards and the Edwards logo are trademarks of Edwards Limited.
Service, spares and accessories
A541-11-880 Issue A
7 Service, spares and accessories
7.1 Introduction
Note: You must not drain the oil from the pumping system. You must clearly state the pump is full of oil when
you complete form HS2.
Edwards products, spares and accessories are available from Edwards companies and distributors world-wide. The
majority of these centres employ Service Engineers who have undergone comprehensive Edwards training courses.
Order spare parts and accessories from your nearest Edwards company or distributor. When you order, please state
for each part required:
1. Model and Item Number of your equipment.
2. Serial number (if any).
3. Item Number and description of the part.
7.2 Service
Edwards products are supported by a world-wide network of Edwards Service Centres. Each Service Centre offers a
wide range of options including: equipment decontamination; service exchange; repair; rebuild and testing to factory
specifications. Equipment that has been serviced, repaired or rebuilt is returned with a full warranty. Your local
Service Centre can also provide Edwards engineers to support on-site maintenance, service or repair of your
equipment. For more information about service options, contact your nearest Service Centre or other Edwards
company.
7.3 Accessories
The accessories available for use with the iXL120(N) dry pump system are described in the following sections. Figure 7
shows how the accessories are fitted to the iXL120(N) dry pump system.
7.3.1 Disconnect box
The disconnect box ensures full compliance with SEMI S2 by providing true EMO functionality.
Whenever you return the system to an Edwards Service Centre or other Edwards company, you
must comply with the requirements of Section 7 and with the requirements of the Return of
Edwards Equipment Procedure (refer to forms HS1 and HS2 at the rear of this manual).
Table 16 - Disconnect box
Item Item number
Disconnect box 200-460 V 50-60 Hz A50806000
To Next Page
Loading...
