A541-11-880 Issue A
Page 36 © Edwards Limited 2010. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Service, spares and accessories
7.3.2 EMS button
An emergency stop button can be mounted on the dry pump and allows external connection to an EMS circuit.
7.3.3 Accessory modules
Two accessory modules are available for the iXL120(N) dry pump system. The Active Accessory Module (AAM) provides
connectivity for up to three directly connected accessories including a gate valve, abatement and water flow sensor,
plus up to two supported active accessories, two thermocouples and the pump status output. The Passive Accessory
Module (PAM) allows up to 3 accessories to be connected to the accessory module interface.
An accessory module extension cable allows the AAM or PAM to be mounted up to 5 m away from the dry pump system.
7.3.4 Pump Display Terminal (PDT)
The PDT allows control and monitoring of the iXL120(N).
7.3.5 PDT adaptor cable
The PDT adaptor cable allows a second PDT to be connected to the iXL120(N).
7.3.6 PDT holster
The PDT holster retains the PDT and is attached to the pump or tool frame.
Table 17 - EMS button
Item Item number
EMS button D37491500
Table 18 - Accessories modules
Accessory module Item number
AAM
*
*
The AAM and PAM cannot be mounted directly on the iXL120(N). Contact Edwards for details.
D37480500
PAM
*
D37480550
Accessory module extension cable (5 m) D37491502
Table 19 - PDT
Item Item number
PDT D37280700
Table 20 - PDT adaptor cable
Item Item number
PDT adaptor cable D37491501
Table 21 - PDT holster
Item Item number
PDT holster D37209800
To Next Page
Loading...
