Edwards nEXT300 - Interface Cable; TIC PC Program

13.10 Interface cable
An int
erface cable connects the pump to a PC. Serial commands are used to control and
monitor the pump.
Table 46 Interface cable
Item
Item Number
nEXT Interface cable B80000808
13.11 TIC PC program
The TIC PC program is a PC‑based soware that can be used to retrieve and set the user
congurable parameters in the pump. TIC PC program enables monitoring and data
logging of the pumping system.
04/2022 - ©Edwards Limited
Page 103B80000880_G
B80000880_G - Accessories