This product has been manufactured under a quality management system certified to ISO 9001:2015
EU Declaration of Conformity
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
Documentation Officer
Jana Sigmunda 300
Lutín , 78349
Czech Republic
T: +42(0) 580 582 728
documentation@edwardsvacuum.com
The product specified and listed below
nXR30i 100-127/200-240V 1ph 50/60 Hz NW25 Inlet
nXR40i 100-127/200-240V 1ph 50/60 Hz NW25 Inlet
nXR60i 100-127/200-240V 1ph 50/60 Hz NW40 Inlet
nXR90i 100-127/200-240V 1ph 50/60 Hz NW40 Inlet
nXR120i 100-127/200-240V 1ph 50/60 Hz NW40 Inlet
Is in conformity with the relevant requirements of European CE legislation:
Note: The safety objectives of the Low Voltage Directive 2014/35/EU were complied with in accordance
with Annex 1 No. 1.5.1 of this directive.
Electromagnetic compatibility (EMC) directive
Class B Emissions, Industrial Immunity
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
Safety of machinery. General principles for design. Risk assessment and risk reduction
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 2021-05-13
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
– Engineering Manager
Scientific Vacuum Division, Lutin
– General Manager