EasyManua.ls Logo

efacec EFAPOWER EV PC G2 - 5.3 HANDLING AND PLACING; 5.3.1 PACKAGING; 5.3.2 VISUAL INSPECTION; 5.3.3 HANDLING

efacec EFAPOWER EV PC G2
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E F A P O W E R E V - PC - I N S T A L L A T I O N A N D U S E R M A N U A L
14 | 37
5.3 HANDLING AND PLACING
Before installing stations
The instructions provided in this manual assume that the appropriate wiring, circuit protection, and
metering are in place at the installation location.
To assist in the process of preparing the installation site, it is recommended that before you begin
installing Charging Station, you thoroughly review the contents of this document to familiarize
yourself with the required installation steps.
Les instructions fournies dans ce guide présume que le câblage approprié, la protection du circuit et
l’outillage de mesure sont en place à l'emplacement d'installation.
Pour aider dans la procédure de préparation du local d'installation, il est recommandé qu’avant de
démarrer l'installation de la station de recharge, vous examinez soigneusement le contenu de ce
document pour vous familiariser avec les étapes d'installation nécessaires.
In case of any doubt regarding items described in this guide, please contact us at:
5.3.1 PACKAGING
EFAPOWER EV-PC Station is shipped in a package that, depending on the order, can be packaged in a group (Central
Unit + Satellite Units). The dimension of each Unit is in Chapter 2.1 - Technical characteristics.
5.3.2 VISUAL INSPECTION
Check if the exterior case has been damaged by mechanical impacts or any accidents during transportation
If applicable, check if the EFAPOWER EV-PC Station decor is in perfect condition
Check if the interior of the Unit(s) is/are clean
Check if the doors of the Unit(s) are working properly
Check for proper Unit(s) protective ground connection point, which should be interconnected with the low
voltage switchboard ground connection during the installation
5.3.3 HANDLING
Each EFAPOWER EV-PC Unit is fixed to a pallet and should be transported with a pallet jack or similar as close as
possible to the installation site.
Due to its weight (max 30kg), this Charging Station can be placed by two persons.
Rua Eng.º Frederico Ulrich - Apartado 3078
4471-907 MOREIRA MAIA - PORTUGAL
Tel: (+351) 229403241 - Fax: (+351) 229403209
serviceEEM@efacec.com
www.electricmobility.efacec.com
2725 Northwoods Parkway, Ste. B
Norcross, Georgia 30071 USA
Tel: (1) 470 395-3648 -
Fax: (1) 770 446 8920
support.eem.usa@efacec.com
www.electricmobility.efacec.com

Related product manuals