E F A P O W E R E V - PC - I N S T A L L A T I O N A N D U S E R M A N U A L
3 | 37
2 GENERAL CHARACTERISTICS
2.1 TECHNICAL CHARACTERISTICS
EFAPOWER EV- Public Charger station technical characteristics are indicated in Table 1.
Table 1 – EFAPOWER EV-PC Technical Characteristics
Contactless RFID Card (Mifare) ISO14443
CE units: Type 1 according to EN 62196-1
Type 2 according to EN 62196-2
GB units: GB/T 18487.1 Mode 3
ETL units: Type 1
according to SAE J1772
CE units: EN 61851-1 and IEC 61851-1 Case B
GB units: GB/T 18487.1 Case C
Direct connection
between the EV and the
EVSE using the cable
supplied with the vehicle.
CE units: EN 61851-1 e IEC 61851-1 Mode 3
GB units: GB/T 18487.1 Mode 3
ETL units: SAE J1772 Mode 3
Mechanical
Characteristics
Wall Mount Unit: 374x275x1080 mm
Wall Mount Unit + Pedestal: 374x275x1450 mm
14.7 x 10.8 x 42.5 inches
14.7 x 10.8 x 57.1
Central Cabinet equipped with Central Unit and up to 2 outputs
(additional 2 x CE7 outputs as optional, only for CE units)
Satellite Cabinet equipped with Central Unit and up to 2 outputs
(additional 2 x CE7 outputs as optional, only for CE units)
Weight (depending on
output configuration)
Specifications are subject to change, without prior notice.