11 Software
Installations and service conditions of the UPS can be detected and handled
by an adequate software package. The software packages are available over
the producer / supplier or over the mentioned service-hotline (chapter
„Service“). There you get necessary information about adequate software
packages with regard to your application and UPS. Also see our website:
http://www.effekta.com/
The following basic functions are supported by all software packages:
Capture and display of the mains condition of the UPS;
Display of the UPS output condition;
Capture and display of the loading condition of the battery pack;
Closing of opened applications in case of power failures;
Shut down of the operating system;
Issue of protocol data;
General control of the UPS-data and conditions
(diagnosis-function);
More information about the several software packages like installation,
handling and performance you get from the software instruction.
To Next Page
Loading...
