Effekta MH6000 - Technical Characteristics; UPS Specifications

UPS MH6000 Manual
MH Series
Page 49 of 51
13 Technical characteristics
13.1 Specifications
Model:
MH6000
Capacity:
6000 VA / 4200 W
UPS input:
phases
1 external conductor + neutral conductor
voltage window
160 -280 V AC
nominal frequency
50 / 60 Hz
synchronized area
45 – 65 Hz
power factor
up to0,99 at 100% linear load
UPS output:
nominal voltage
220 / 230 / 240 V AC (sinus) optional
voltage regulation
+/-2 % (statically)
frequency tolerance
+/-1 % (battery service)
transfer time
0 ms
crest factor
3:1
autonomy time
> 8 min.
nominal power factor
0,7
overload
<105% : 160 s
>105 % … < 150% : 40 ms
>150% : immediately
Efficiency factor:
AC -> AC (normal)
up to 91%
AC -> AC (eco)
up to 98 %
Battery
type
sealed lead battery, maintenance-free 12 V /
7 AH
quantity
20 pcs.
voltage
240 V DC
recharge time
4 hours up to 90%
Display
status on LED + LCD
line mode, backup mode, eco mode,
bypass supply, low battery, bad /
disconnected battery , battery connected,
overload, transferring with interruption and
UPS fault.
reading on LCD
input voltage, input frequency, output
voltage, output frequency, load percentage,
battery voltage and internal temperature
self diagnosis
24 hours routine checking when switching-
on
Alert
acoustical and
optical
blackout, low battery, transfer to bypass,
system failure conditions.
Environment:
allowed temperature
0 ... +40 °C