Every 8 Hours
Document ID: OMM-00144-L VUTEk 3r & 5r Series Maintenance Guide 23
The following maintenance tasks must be performed every 8 hours of production.
Compressed Air Quality Specification document, https://inkjet.support.efi.com/doc.php?doc=975
.
How-to Video:
Directions:
• Follow all manufacturer recommendations for maintenance and care of the facility compressed air system, point of use air
filtration/drying systems, and any other third-party compressed air quality control equipment in order to maintain a constant,
clean, and dry compressed air supply to the printer. Also see Check last chance air and water filters.
4.0 Every Eight Hours
4.1 Check facility air compressor and air filter systems.
Caution: Impurities in the air system are a major cause of print damage and printer defects!
CLICK TO PLAY
To Next Page
Loading...
