EFI VUTEk 5r Series - 6.7 Clean carriage rail ends.

Every 40 Hours
Document ID: OMM-00144-L VUTEk 3r & 5r Series Maintenance Guide 47
PPE Items: GLOVES NITRILE DISPOSABLE BOX LARGE
SAFETY GLASSES
Required Items: WIPES 9X9 CLEAN ROOM
How-to Video:
Directions:
1. Manually move the carriage 24” from HOME position; this exposes the HOME carriage rail ends.
2. Open the printer hood and insert the retaining pins into the LH and RH pin sockets.
3. Wipe down both the LH and RH carriage rail ends with a lint-free wipe.
4. Remove the retaining pins after completing tasks.
5. Return carriage to HOME position.
6.7 Clean carriage rail ends.
CLICK TO PLAY
Figure 6-14 Grease at Carriage Rail End (Left) and Wiping grease (Right)