Need help?Do you have a question about the Efka dc1550 and is the answer not in the manual?
General| Brand | Efka |
|---|---|
| Model | dc1550 |
| Category | Controller |
| Language | English |
Ensures compliance with EC directives and industrial machine safety standards.
Sets the clockwise or counterclockwise rotation of the motor using parameter 161.
Details installation and connection of HSM001 Hall sensor or IPG pulse encoders.
Configures the motor-to-machine shaft ratio for accurate speed control.
Chooses operational modes like thread trimming based on machine type and parameter 290.
Assigns specific functions to input keys (in1-i10) for user control and automation.
Sets the operational speed for precise needle positioning using parameter 110.
Determines and sets the maximum operational speed compatible with the sewing machine.
Configures stop positions (1 and 2) using sensor inputs or preset values.
Establishes a reference point for accurate angular position measurement and calibration.
Adjusts braking effect based on preset values for controlled stopping.
Prevents unintended needle movement when the drive is stopped.
Manages gradual acceleration for smoother sewing starts and transitions.
Configures initial backtack or stitch condensing sequences at the seam start.
Manages backtack and stitch condensing operations at the end of the seam.
Enables backtack operation anywhere in the seam or at standstill.
Enables speed limitation based on lift height for optimized sewing.
Combines stitch counting with light barrier activation for advanced seam control.
Enables automatic sewing start upon light barrier activation with fabric presence.
Assigns specific machine functions to input pins (in1-i13).
Configures analog pedal input and its characteristic curves for variable control.
Guides testing of inputs and outputs using the V810/V820/V850 control panels.
Checks the status of various inputs like sensors and keys via control panel displays.
To Next Page