Eighteeth E-xtreme - Setting; Set memory mode

6 Setting
Page
17
/
52
6. Setting
6.1 Set memory mode
M 1 3.0 N cm
·
400
rpm
M 1 3.0 N cm
·
400
RPM
The device has 10 memory mod-
es (M0-M9) ， press + or
-
at standby mode ， memory
number (②) will change
accordingly.
Each memory mode includes its
own speed (①)，operation mode
(④) and torque (③). These para-
meters can be set separately.
(Adjust parameters according
to chapter 6.2).
M 0
180 °
30°
M0 is a separate mode of recip-
rocating mode. Including forwa-
rd angle(①) and reverse angle
(④). These parameter can be set
separately. (Adjust parameters
according to chapter 6.2).
Figure(②)means Forward ， and
figure(⑤)means Reverse. The bi-
gger figure means angle of this
direction is bigger than the other
one.