Eighteeth E-xtreme - Preset programs

6 Setting
Page
21
/
52
6.3 Preset programs
Protaper S2
F w d
3.0N·cm
-
40 0RPMProtaper SX&S1
M1
For the convenience of the operator, so-
me common root canal file systems are
preset.
Long press S at standby mode to en-
ter preset mode, the screen will display
as the figure shows on the left.
M1(①)means current memory mode, o-
perator can choose preset mode(②) to
replace it. Press + or - to switch
(press the key several times to jump to
the next page). Then press
●
to con-
firm.
Fw d
2.0N·cm
-
300RPMOne Flare
One Shape
One Curve
If you select one of the preset program-
ms, such as "one curve" (①) , the corr-
esponding operation mode( ② ), speed
(③) and torque(④) will be automatically
set.
NOTE
Protaper
®
, GATES
®
, Pro.Glider
®
, and
Wave one
®
is a registered trademark of
Dentsply.
Mtwo
®
, Flex.Master
®
, Reciproc
®
and R-
Pilot
®
is a registered trademark of VDW.
K3XF
®
, TF
®
is a registered trademark of
SybronEndo.
OneG
®
, OneShape, OneFlare, 2Shape
and OneCurve
®
is a registered tradem-
ark of Micro-Mega
XPendo.Shaper
®
, XPendo.Finisher
®
, Ir-
ace
®
, BT-Race
®
and BioRace
®
is a reg-
istered trademark of FKG