Eighteeth HyperLight - 5. Installation; 5.1 Plug in the charging cable; 5.2 Install backscatter radiation shielding

5 Installation
Page 11 / 35
5. Installation
5.1 Plug in the charging cable
First open the silicone cover, then plug one end of the charger into
the machine and the other end into the socket. The charging icon will be
displayed on the screen at this time.
External extension cord interface
Charging port
NOTE
Extension cords are not provided.
5.2 Install backscatter radiation shielding
Put the backscatter radiation shielding on the machine. This step is
required only when an optional backscatter radiation shielding is required.