7 Cleaning
Page 22 / 35
7 Cleaning
1. Use medical alcohol (Ethanol 70 to 80 vol%) to wipe the surface of the
HyperLight ,charger,base and Backscatter Radiation Shielding. Do not use
cleaning agents other than ethanol,since certain chemical combinations may
deteriorate the HyperLight plastic prematurely.
2. Unplug the charging cradle before cleaning.
The HyperLight, the base, the charging cradle, and the AC power supply
are not designed to be subjected to any kind of sterilization procedure.
To Next Page
Loading...
