Eighteeth HyperLight - 10.2 X-ray Tube Specifications and Characteristics

10 Technical Data
Page 27 / 35
10.2 X-ray Tube Specifications and Characteristics
Filament voltage
2.4-3.0V
Maximum filament current
2.9A
Nominal tube voltage
70kV
X-ray source assembly
maximum heat content
4500J
Maximum anode cooling rate
110W
Nominal anode input power
600W
Target material
Tungsten
Minimum target angle
12°
Filament voltage (at maximum
filament current 2.9A)
2.4~ 3.0V
Minimum permanent filtration
(IEC 60522:1999)
0.8mm/75kV
Nominal focal spot (IEC
60336:1993)
0.4mm
：