Eizo ColorEdge CS270 User Manual

17
Chapter 2 Adjusting Screens
2-2. To select the display mode (color mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode Purpose
Standard Mode Adjust color using the monitor’s Adjustment menu.
1-Custom Available for the color settings according to your preference.
2-Paper Produces a printed paper effect by decreasing contrast and color temperature.
3-Adobe
®
RGB Suitable for color matching with Adobe
®
RGB compatible peripherals.
4-sRGB Suitable for color matching with sRGB compatible peripherals.
CAL Mode Adjust the monitor’s color using software.
5 -CAL1
6-CAL2
7-CAL3
Displays the screen adjusted by the Color Management Software “ColorNavigator 6”.
Attention
• Avoid operating any function of the monitor while using ColorNavigator 6.
The mode menu appears.
1-Custom
↓↑
2-Paper
↓↑
3-Adobe
®
RGB
↓↑
4-sRGB
↓↑
5- CAL1
↓↑
6-CAL2
↓↑
7-CAL3
Example:
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time is pressed.
You can switch the mode with or while the mode menu is displayed.
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specic mode to be selected. For more information, see “3-2. Skipping Unused Display Modes” (page 28).

Eizo ColorEdge CS270 Specifications

General

Brand	Eizo
Model	ColorEdge CS270
Category	Monitor
Language	English