34
Chapter 5 Power Saving Functions
Chapter 5 Power Saving Functions
5-1. Setting Power Save
This function allows you to specify whether to set the monitor in the power saving mode, depending on the state of
an external device connected to it. When the monitor has shifted to the power saving mode, the images on the
screen are not displayed.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
• Devices connected to the USB downstream port work when the monitor is in power saving mode or when the power button
of the monitor is Off . Therefore, power consumption of the monitor varies with connected devices even in the power saving
mode.
• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Procedure
1. Choose “PowerManager” from the Adjustment menu, and press
.
2. Choose “Power Save” from “PowerManager”, and press
.
3. Select “On” or “Off” with
or .
4. Press
to exit.
Power Saving System
When the external device connected is a PC
At DVI signal input
This monitor complies with the “DVI DMPM” standard.
At DisplayPort signal input
This monitor complies with the “DisplayPort Standard V1.1a”.
PC Monitor Power Indicator
On Operating mode Blue
Power saving mode Power saving mode Orange
When the external device connected is not a PC
Ext. Device Monitor Power Indicator
On Operating mode Blue
Power saving mode Power saving mode Orange
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display
mode.
To Next Page
Loading...
Need help?
General