Eizo ColorEdge CS270 User Manual

40
Chapter 7 Reference
7-2. Detaching/Attaching Stand Base
Detaching procedure
The stand base that was attached during setup can be detached using the following procedures.
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Raise the lever on the bottom of the stand base.
3.
Turn the stand base in the counterclockwise direction to detach it.

Eizo ColorEdge CS270 Specifications

General

Brand	Eizo
Model	ColorEdge CS270
Category	Monitor
Language	English