16
Chapter 2Chapter Advanced Adjustment / Setting
●
PinP
If you press (INPUT) while in PinP dual screen mode, the "PinP" menu is displayed.
Function Setting Description
Large Window
*1
DisplayPort / HDMI / SDI 1 /
SDI 2 / DVI
Select the signal input to the large window when PinP dual
screen display.
Note
• This function can be set when the "Signal format" in either
2D or 3D mode is set to "SIMUL", "LINE BY LINE", or
"LEVEL B".
• "SDI 1" and "SDI 2" cannot be displayed simultaneously.
Small Window
*1
DisplayPort / HDMI / SDI 1 /
SDI 2 / DVI
Select the signal input to the small window when PinP dual
screen display.
Note
• "SDI 1" and "SDI 2" cannot be displayed simultaneously.
• 3D signals will be shown as 2D.
PinP Size Small / Large Select size of the small window.
PinP Position Upper Right / Lower Right /
Lower Left / Upper Left
Select position of the small window.
Swap Swaps the input ports of the large window and small window.
Note
• Swapping may not be possible for some input signals.
*1 In 3D mode, the same signal cannot be selected for both the "Large Window" and "Small Window".