11
Chapter 1 Introduction
●
Functions
The following table shows the Setting menu and setting items of each menu.
Main menu Setting Reference
Color
*1
Brightness “2-3. Adjusting Color” (page 14)
Contrast
Temperature
Gamma
Advanced Settings Saturation
Hue
Overdrive
Gain
Color Reset “To reset the color adjustments” (page
27)
Screen Screen Size “Screen Size Changing” (page 24)
Smoothing “2-4. Screen Adjustment” (page 20)
Analog Adjustment
*2
Auto Screen Adjust
Auto Range Adjust
Clock
Phase
Hor.Position
Ver.Position
PowerManager Power Save “4-1. Setting Power Saving” (page 28)
Eco Timer “4-5. Enabling / Disabling Auto Power-
OFF” (page 30)
Monitor Settings Input Signal “To set input signal selection” (page
37)
Power Indicator “4-2. Setting Power Indicator” (page
29)
Language “3-6. Setting Language” (page 26)
DDC/CI “3-1. Enabling / Disabling DDC/CI
communication” (page 25)
Border Intensity “To adjust brightness of non-display area”
(page 24)
Menu Settings Orientation “3-3. Setting Orientation” (page 25)
Logo “3-4. Showing and hiding the EIZO logo”
(page 26)
Menu Position “3-5. Changing Setting Menu Display
Position” (page 26)
Reset “To reset all adjustments to the default
settings” (page 27)
Information “6-4. Displaying Monitor Information”
(page 38)
*1 The adjustment / settings available on the “Color” menu depend on the selected Color mode (see
“Adjustable settings in each mode” (page 15)).
*2 These functions can be adjusted with analog input.
To Next Page
Loading...
