15
2.7 “Simplified” mode function (allows a single cooking step)
The following parameters can be set by touching the “Simplified” mode icon on the display:
Fig.8 Fig.9 Fig.10
The parameter value is set by sliding, up or down, your finger on the “number” next to the parameter (Fig.
8), to the desired value; or by turning the knob clockwise or anti-clockwise to the desired value. This value
is confirmed by pressing the knob; turning it again goes directly to the next parameter.
The “ ” symbol is present at top-left of the display; touching it, displays a window (Fig. 9) which allows
enabling the following functions:
Touching “” displays the “summary” screen (Fig. 10); touching it again, enables the cooking cycle. The
following are displayed at the top-right of the screen: the remaining cooking time and the actual
temperature in the cooking chamber. The “ ” symbol is on the left of the screen and the “ ” symbol
is in the centre. The “summary” screen contains all parameters and functions that can be set for a single
cooking step. By selecting each individual parameter, you can edit the set value at any time; simply touch
the symbol of the desired parameter: a window appears indicating the parameter and its set value. The
new value can be set by sliding the finger or turning the knob; touching the “” symbol in the window
automatically confirms the value and the window goes back to “summary” screen mode; vice-versa, if the
“ ” symbol is touched the new parameter value is not confirmed and the previous value remains active.
Bottom-left of the “summary” screen has the symbol “ ” which allows to go back to the previous
screen, while bottom-right has the symbol “ ” which allows stopping the cooking cycle.
To Next Page
Loading...
