30
Date bar Blinking date/time bar on the display
The date/time settings are lost.
Set date and time
Battery
symbol,
blinking
Battery error
The batteries are nearly empty.
Replace batteries
bat
Battery error
The batteries are empty or expired or low quality
batteries have led to corrosion of the battery contacts.
Replace batteries. Use only quality
batteries. Contact Lactate Scout+ Service
in case of corroded battery contacts.
Code control The display “set CODE” blinks after inserting a sensor The set code must be checked and and if
necessary corrected after 24 tests.
LO display Test result too low
The test value is below the test range of the
Lactate Scout+
Repeat the test using new sensor and
new coding, follow the instructions for
performing the test carefully, dry hands
carefully prior to testing.
Perform functionality test. In case of Er4
message contact Lactate Scout+ Service.
HI display Test result too high
The test value is above the test range of the
Lactate Scout+
Repeat the test using new sensor and
new coding, follow the instructions for
performing the test carefully, wash hands
carefully prior to testing.
Perform functionality test. In case of Er4
message contact Lactate Scout+ Service.
Troubleshooting
To Next Page
Loading...