GENERAL INFORMATION
06/2020 9 NP-DK50 2V 50, 2x2V 110-A-5_06-2020-MD
5. STORAGE AND TRANSPORT
The manufacturer ships the compressor in a transport packaging. This protects the device from
damage during transport.
Risk of damage to pneumatic parts.
The compressor may be transported only depressurized. Vent air pressure from
the pressure tank and pressure hoses and drain condensate from the air tank
before transporting the compressor.
Original packaging must be kept for eventual return of the device. If possible,
always use the original compressor packaging for optimal protection of the
product. If it is necessary to return the product within the guarantee period, the
manufacturer does not guarantee for damages caused by incorrect packaging of
the product.
Transport the compressor in an upright position, always secured by transport
fixing elements.
Protect the compressor from high humidity, dirt and extreme temperatures during
transport and storage. Do not store together with volatile chemical substances.
If it is not possible to keep the original packaging, dispose of the packaging in an
environmentally friendly way. Transport cardboard can be recycled with old paper.
It is not permitted to store and transport the device outside the defined
conditions, see below.
5.1. Ambient conditions
Products can be stored in rooms and means of transport that are free from any traces of volatile
chemical substances under the following climatic conditions:
from –25°C o +55°C, in 24h to +70°C
max. 90% (without condensation/ non-
condensing)
To Next Page
Loading...
