ELBO CONTROLLI E236+ - Product Certification and Compliance; Compliance with Safety Directives

To Next Page

To Previous Page

2. CERTIFICATION ELBO CONTROLLI srl

Preset E236+

2. CERTIFICATION

The manufacturer, ELBO CONTROLLI S.r.l., under its own responsibility,

DECLARES THAT:

the E236+ presetter conforms to the following safety standards where enforceable:

• 2006/42/CE Machinery Directive (MD)

to the harmonized standards EN ISO 12100:2010

• 2014/30/EU Electromagnetic Compatibility Directive (EMC)

to the harmonized standards EN61326-1:2013, EN55011:2009+A1:2010 ISM (group 1, class A),

EN61000-3-2:2014, EN61000-3-3:2013, EN61000-4-2:2009,

EN61000-4-3:2006+A1:2008+A2:2010, EN61000-4-4:2012,

EN61000-4-5:2006, EN61000-4-6:2009, EN61000-4-11:2004

• 2014/35/EU Low Voltage Directive (LVD)

to the harmonized standards EN60950-1:2006+A2:2013, EN60204-1:2006+A1:2009, EN61010-

1:2010

• 2011/65/EU Restriction of Hazardous Substances (RoHS II)

• 2012/19/EU Waste Electrical and Electronic Equipment (WEEE)

as it results from the technical construction file and from the enclosed testing reports, kept by our seat.

MEDA, ___________ Massimiliano Tasca

General Manager

Information relating to this presetter is listed on the identification plate stamped on the left-hand side of the

machine as shown above.