Elcontrol NanoVIP3 - Reference Standards

Man. NVIP3 – Rel 1.3 EN (UK)
- 8 -
2.3 - Reference Standards
Standard Title Description Int. Link
EN 61010-1
Safety requirements for
electrical equipment for
measurement, control, and
laboratory use.
General safety requirements for electrical
equipment intended for professional,
industrial process, and educational use.
Electrical test and measurement, control,
and laboratory equipment.
Identical to
IEC 61010-1:2001-02
EN 61010-1:2001-03
EN 61326
Electrical equipment for
measurement, control and
laboratory use.
EMC requirements.
This Standard specifies the minimum
requirements for immunity and emissions
regarding electromagnetic compatibility
(EMC) for electrical equip
ment, operating
from a supply or battery of less than
1000 VAC or 1500 VDC, intended for
professional, industrial-process, industrial-
manufacturing and educational use,
including equipment and computing
devices for measurement and test;
control; laboratory
use; accessories
intended for use with the above
equipment.
Identical to
IEC 61326-1: 1997-03
EN 61326-1:1997-04
EN 61326-1 Ec:1998-01
EN 61326/A1
Electrical equipment for
measurement, control and
laboratory use.
EMC requirements.
This amendment modif
ies the
requirements for the immunity tests laid
down in Standard IEC EN 61326 for the
three specific applications specified
below:
Use in industrial environment; use in
laboratories or test and measurement
areas with electromagnetically-
controlled
environ
ments; portable test and
measurement equipment operating from
a battery or from the circuit being
measured.
Identical to
IEC 61326-1/A1: 1998-05
EN 1326/A1: 1998-06
EN 61326-1 Ec:1998-09
EN 61326/A2
Electrical equipment for
measurement, control and
laboratory use.
EMC requirements.
This amendment adds an annex to the
basic Standard introducing more detailed
specifications regarding test
configurations, operating conditions, and
performance criteria for certain
equipment intended for applications
where n
o special EMC requirements are
provided. Some examples of such
equipment are: oscilloscopes, logic
analysers, spectrum analysers, digital
multimeters, etc.
Identical to
IEC 61326-1/A2: 2000-08
EN 61326/A2: 2001-05
EN 61326/A3
Electrical equipment for
measurement, control and
laboratory use.
EMC requirements
This amendment to IEC EN 61326 (IEC
65-
50) adds regulatory Annexes E & F to
the basic Standard, regarding test
configurations, operating conditions, and
performance criteria for portable test,
measur
ement and monitoring equipment
which are used in low voltage distribution
systems.
Identical to:
IEC 61326:2002-02
(Annex E & F);
IEC 61326/Ec1:2002-07
EN 61326/A3:2003-12